Publications (last updated July/2013) 17. Cadman J, Chang CC, Chen JN, Chen YH, Zhou SW, Li W and Li Q (2013). Bioinspired Lightweight Cellular Materials - Understanding Effects of Natural Variation on Mechanical Properties. Materials Science and Engineering C, - Materials for Biological Applications, 33(6): 3146-3152. 16. Chen JN, Rungsiyakull C, Li W, Chen YH, Swain M and Li Q (2012). Multiscale design of surface morphological gradient for osseointegration. Journal of the Mechanical Behavior of Biomedical Materials, 20:387-397. 15. Zhou SW, Cadman J, Chen YH, Li W, Xie YM, Huang XD , Appleyard R, Sun GY and Li Q (2012). Design and fabrication of biphasic cellular materials with transport properties - A bidirectional evolutionary structural optimization procedure and MATLAB program. International Journal of Heat and Mass Transfer, 55:8149-8162. 14. Cadman J, Zhou SW, Chen YH and Li Q (2012). Review: On Design of Multifunctional Microstructural Materials. Journal of Materials Science, In press. 13. Cadman J, Chen YH, Zhou SW and Li Q (2012). Cuttlebone: Characterisation, Application and Development of Biomimetic Materials. Journal of Bionic Engineering, 9:367-376. 12. Chen YH, Schellekens M, Zhou SW, Cadman J, Li W, Appleyard R and Li Q (2011). Wall shear stress based bi-directional evolutionary structural optimization procedure for flow-induced erosion design. Journal of Biomechanical Engineering- Transactions of ASME, 081008:1-10. 11. Chen YH, Zhou SW and Li Q (2011). Microstructure design of tissue scaffold and its effect on tissue regeneration. Biomaterials, 32:5003-5014. 10. Chen YH, Zhou SW and Li Q (2011). Mathematical modeling of degradation for bulk-erosive polymers: applications in tissue engineering scaffold and drug delivery system. Acta Biomaterialia, 7:1140-1149. 9. Zhou SW, Li W, Chen YH and Li Q (2011). Topology optimization for negative permeability metamaterials using level-set algorithm. Acta Materialia, 59:2624-2636. 8. Chen YH, Cadman J, Zhou SW and Li Q (2011). Computer-aided design and fabrication of bio-mimetic materials and scaffold micro-structures. Advanced Materials Research, 213:628-632. 7. Chen YH, Zhou SW, Cadman J and Li Q (2010). Design of cellular porous biomaterials for wall shear stress criterion. Biotechnology & Bioengineering, 107:737-746. (Feature ‘Spotlight’ Article) 6. Cadman J, Chen YH, Zhou SW, Li Q (2010). Assessing the effects of natural variations in microstructure for the bio-mimetic modeling of cuttlebone. Advanced Materials Research, 123-125:295-298. 5. Chen YH, and Li Q (2010). Mathematical modeling of polymer biodegradation and erosion. Materials Science Forum, 654-656:2071-2074. 4. Cadman J, Chen YH, Zhou SW and Li Q (2010). Creating biomaterials inspired by the microstructure of cuttlebone. Materials Science Forum, 654-656:2229-2232. 3. Chen YH, Zhou SW and Li Q (2009). Multiobjective topology optimization for finite periodic structures. Computers & Structures, 88:806-811. 2. Cadman J, Zhou SW, Chen YH, Li Wei, Appleyard R and Li Q (2009). Characterization of cuttlebone for a bio-mimetic design of cellular structures. Acta Mechanica Sinica, 26:27-35. 1. Chen YH, Zhou SW and Li Q (2009). Computational design for multifunctional microstructural composites. International Journal of Modern Physics B, 23:1345–1351.
Proceedings 5. Chen YH, Cadman J and Li Q (2010). Effect of scaffold architecture on tissue regeneration. International Federation for Medical and Biological Engineering, 31:815-818. 4. Cadman J, Chen YH, Zhou SW, Naomi T and Li Q (2010). A Computational Method for Designing Biomimetic Materials Inspired by Cuttlebone. Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics. 3. Chen YH, Li Q (2010). Design and optimization for biodegradable synthetics in computational tissue engineering. Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics. 2. Chen YH, Zhou SW and Li Q (2009). Level-set Based Topology Optimization of Micro-fluidic Wall Shear Stress in Tissue Engineering. Proceedings of 8th World Congress on Structural and Multidisciplinary Optimization. 1. Cadman J, Zhou SW, Chen YH, Li Q (2009). Topological Optimization of Cellular Structures, Learnt from Cuttlefish. Proceedings of 8th World Congress on Structural and Multidisciplinary Optimization.
Conferences & Talks 20. Chen YH, Fathi A, Dehghani F, Siepmann F, Siepmann J and Li Q. Microstructural Design Optimization of Tissue Scaffolds: Degradation v.s. Regneration - A Mechanobiological Study. 19th Congress of the European Society of Biomechanics (ESB 2013), Aug. 2013, Patras, Greece. 19. Li Q, Chang CC, Chen JN, Cadman J, Li W, Zhou SW and Chen YH. Computational Design of Multifunctional Microstructural Materials - An Inverse Problem. The 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-8), Aug. 2013, Hawaii, USA. 18. Chen YH. Microstructural Design of Porous Biomaterials – Application of Topology Optimization in Biomedical Engineering. Invited seminar, Feb. 2012, Johns Hopkins University, USA. 17. Chen YH, Cadman J, Zhou SW, Li W, Appleyard R and Li Q. Topology Optimization of Cellular Biomaterials and its Applications in Design of Tissue Scaffolds. 11th U.S. National Congress on Computational Mechanics (USNCCM-11), Jul. 2011, Twin cities, USA. 16. Chen YH, Cadman J, Zhou SW, Li W, Appleyard R and Li Q. Topology Optimization of Tissue Scaffolds for Matrix Degradation and Tissue Regeneration Criteria. 9th World Congress on Structural and Multidisciplinary Optimization (WCSMO-9), Jun. 2011, Shizuoka, Japan. 15. Chen YH, Cadman J, Zhou SW, Li W, Appleyard R and Li Q. Topology Optimization for Enhancing Fluidic Performance of Periodic Structures. 6th MIT Conference on Computational Fluid and Solid Mechanics (MIT6), Jun. 2011, Cambridge, USA. 14. Chen YH,Cadman J,Zhou SW and Li Q. Computer-aided Design and Fabrication of Bio-mimetic Materials and Scaffold Micro-structures. 2011 International Conference on Advanced Material Research (ICAMR2011), Jan. 2011, Chongqing, China. 13. Li Q, Zhou SW, Chen YH, Tammareddi S and Cadman J. Topology Optimization for Fluidic Criteria. International Conference on Computational Methods (ICCM2010), Nov. 2010, Zhangjiajie, China. (Invited Talk) 12. Chen YH, Cadman J, Zhou SW and Li Q. Design of Printable Biopolymer Devices for Degradation Control. 2010 International Conference on Biofabrication (BF2010), Oct. 2010, Philadelphia, USA. (Invited Talk) 11. Chen YH, Li Q. Design and Analysis of Porous Scaffold –A Numerical Study. 2010 Student Conference of GSE, Oct. 2010, Sydney, Australia. (Best Presentation Award) 10. Cadman J, Chen YH, Zhou SW and Li Q. Assessing the Effects of Natural Variations in Microstructure for the Biomimetic Modeling of Cuttlebone. 3rd International Conference on Multi-functional Materials and Structures (MFMS2010), Sep. 2010, Jeonju, Korea. 9. Chen YH, Li Q. Effect of Scaffold Architecture on Tissue Remodeling. The 6th World Congress on Biomechanics (WCB2010), Aug. 2010, Singapore. 8. Cadman J, Chen YH, Zhou SW and Li Q. Creating Biomaterials Inspired by the Microstructure of Cuttlebone. The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-7), Aug. 2010, Cairns, Australia. 7. Chen YH, Li Q. Mathematical Modeling of Polymer Biodegradation and Erosion. The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-7), Aug. 2010, Cairns, Australia. 6. Cadman J, Chen YH, Zhou SW, Naomi T and Li Q. A Computational Method for Designing Biomimetic Materials Inspired by Cuttlebone. The 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), Jul. 2010, Sydney, Australia. 5. Chen YH, Li Q. Design and optimization for biodegradable synthetics in computational tissue engineering. The 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics (WCCM/APCOM 2010), Jul. 2010, Sydney, Australia. 4. Chen YH, Zhou SW and Li Q. Mathematical modeling and simulation of biodegradation. The International Conference and Exhibition on Materials and AustCeram 2009 (MA 2009), Jul. 2009, Gold Coast, Australia. (Invited Talk) 3. Chen YH, Zhou SW and Li Q. Level-set Based Topology Optimization of Micro-fluidic Wall Shear Stress in Tissue Engineering. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Jun. 2009, Lisbon, Portugal. 2. Cadman J, Zhou SW, Chen YH, Li Q. Topological Optimization of Cellular Structures, Learnt from Cuttlefish. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Jun. 2009, Lisbon, Portugal. 1. Chen YH, Zhou SW and Li Q. Computational design for multifunctional microstructural composites. The 5th International Conference on Advanced Materials and Processing (ICAMP-5), Sep. 2008, Harbin, China. (Invited Talk)
Yuhang Chen © 2012 | ||||
